How much does a BioSemi biopotential measurement system cost ?
 
The ActiveTwo system is sold in versions with 8 up to 256 channels. A system in basic version consists of electrodes, AD-box, two battery-packs, battery charger, optical USB2 receiver, and LabVIEW acquisition software (executable and VI with source code, see software page for details about custom made software). The price of a complete system including active electrodes is EUR 12,000 plus EUR 200 per channel plus EUR 1280 per set of 32 electrodes. Thus a 16-channel system inc. electrodes is priced at EUR 15,840.- and a 256-channel system inc. electrodes is priced at EUR 73,440.- An upgrade to more channels is always possible at a later stage at a price of EUR 200 per channel. All systems bear a 3 year warranty (1 year on electrodes and batteries).
 
The price of a system depends on the number of channels, below are some indicative prices:
8 channels hardware complete with active electrodes, plus acquisition software: approx: EUR 14,500
16+8 channels hardware complete with headcaps and active electrodes, plus acquisition software: approx: EUR 18,000
32+8 channels hardware complete with headcaps and active electrodes, plus acquisition software: approx: EUR 22,000
64+8 channels hardware complete with headcaps and active electrodes, plus acquisition software: approx: EUR 30,000
128+8 channels hardware complete with headcaps and active electrodes, plus acquisition software: approx. EUR 45,000
160+8 channels hardware complete with headcaps and active electrodes, plus acquisition software: approx. EUR 53,000
256+8 channels hardware complete with headcaps and active electrodes, plus acquisition software: approx. EUR 76,000
The above prices are excluding PC and analysis software, and excluding VAT.
 
BioSemi products prices (excluding VAT, in Euro) Click here to download the full price list in .pdf format.
ActiveTwo Base system, this includes:
12000
   
  - AD-box
  - 0 x Amplifier/converter module
  - 2 x Battery-box
  - USB2 Receiver
  - Charger
  - LabVIEW acquisition software
   
     
Amplifier module (8 amplifier channels)
1600
 
For an AD-box with 64+8 channels you will need 8+1 modules
ActiveTwo Analog Input Box (including 8 channels)
4000
 
For measuring signals from not isolated sources.
Daisy-chain (option for AD-box to operate as slave)
1000
 
Up to 4 boxes can be optically daisy-chained.
16 channel Active electrode set (PIN type)
640
 
32 channel Active electrode set (PIN type)
1280
  Electrode set order codes.
32 channel Active electrode set + CMSDRL (PIN type)
1280
 
Headbox ACT32
1000
  Headbox with 32 TouchProof inputs.
ECG BSM Carbon electrode panel2x12
2000
   
ECG BSM Carbon electrode panel4x8
4000
   
8 Touch-proof Active FLAT electrodes (8 x TP FLAT)
400
   
8 Touch-proof Active PIN electrodes (8 x TP PIN)
400
   
CMSDRL PIN Cord (CMS=PIN, DRL=PIN) 100  
Needed when not having CMSDRL on the A-set
CMSDRL FLAT Cord (CMS=FLAT, DRL=FLAT) 100  
Needed when not having CMSDRL on the A-set
CMSDRL PINFLAT Cord (CMS=PIN, DRL=FLAT) 100  
Needed when not having CMSDRL on the A-set
16 channel headcap (all sizes) 280    
32 channel headcap (all sizes) 360    
64 channel headcap (all sizes) 520    
128 channel headcap (all sizes) 840    
160 channel headcap (all sizes) 1000    
256 channel headcap (all sizes) 1480    
Respiration belt (Input + cord)
1125
   
Respiration belt Cord (cord only)
400
   
Galvanic skin response (Input + cord)
1125
   
Galvanic skin response Cord (cord only)
150
   
Temperature Skin (Input + cord)
1100
   
Temperature Skin cord (cord only)
300
   
Plethysmograph Ear (Input + cord)
900
   
Plethysmograph Ear cord (cord only) 700    
ABR (Auditory Brainstem Response) (input + cord)
3000
   
ABR Cord (cord only)
500
   
Response Switch (Ergo Input + cord)
475
 
For adding triggers to the EEG data.
Response Switch Cord (cord only)
75
   
Microphone (excluding Ergo input)
200
   
Photo sensor (excluding Ergo input)
150
   
Ergo input (needed for Microphone & Photo cell)
400
 
Needed for Microphone, Photosensor or Response switch.
Ergo input Dual (2 x bi-polar Ergo input)
800
   
Extra battery-box
550
   
Extra charger
550
   
Extra USB2 Receiver
1400
   
       
       

Parts & Maintenance (excluding VAT, in Euro)

Empty headcap
200
   
Electrode holders for headcap (mounted inside headcap)
5
   
Electrode holders for headcap (not mounted)
4
   
Adhesive disks 13x5 mm (reel of 500)
80
   
Adhesive disks 20x8 mm (reel of 500)
80
   
Electrode gel (tube of 250 gram Parker Signa gel)
12
  Advised for EEG electrodes.
Elefix (jar of 400 gram)
50
  Advised for EMG/ECG/GSR electrodes
Syringe blunt needle 1    
New optical fiber (5, 10 or 20 meter)
100
   
Replacement of an Active electrode on an electrode set
For free
  (When set is still in good condition)
Replace fiber receptacle on AD-box or receiver
200
   
Replacement of battery cells
150
   
Jazz eye tracker system integrated with ActiveTwo
8000
   
USB Trigger Interface
100
   
Presentation to BioSemi interface cable 200    
       
Software (excluding VAT, in Euro)
LabVIEW programming (LabVIEW programming by BioSemi)
50 Euro an hour
   
BESA  
BESA is the most widely used software for source analysis and dipole localization in EEG and MEG research  
- Besa Basic: Review & Averaging
4.850
- Besa Standard: Basic + 'Source Analysis'
11.100
- Besa Complete: Basic + 'Source Analysis' + 'Coherence Analysis'
14.750
   
EMSE  
4D multimodal functional brain imaging, including analysis, source estimation, image processing, and visualization.  
- Locator
1900
- Data editor
2200
- Source estimator
4000
- MR Viewer
2200
 
Note 1: Modules, Active electrodes and other BioSemi accessories can only be used with the ActiveTwo Base-system, therefore these parts are only sold to existing ActiveTwo users and are not sold separately.
Note 2: Use the above prices as a guideline, for some countries additional surcharges have to be considered because of local taxes, shipping, additional insurance costs, and the extra costs of a local service/support network. Please ask us or your local dealer for a quotation.
Note 3: Minimum order amount for parts and maintenance (Gel, adhesive disks) is 150 euro.
   
  All BioSemi products are for research applications only. Not sold as a medical device as defined in EU directive 93/42/EEC. Not designed or intended to be used for diagnosis or treatment of disease.